2005-04-01 Order processed. No return on this way.More...
2005-04-08 Plans arrived to the post office.More...
2005-04-25 Drawing moulds for a model with the spreadsheet. This was useful when I later printed out lists of coordinates for the real size moulds.
2005-04-25 The model indicates the importance of accurate measures. Let's hope that wood does not shrink as drying paper did.
2005-04-25 The model is finished.
2005-06-28 I was not able to start the boat building in the spring so I had to waste my time with the first version of this site.
2005-07-21 First cut. There was no time for bulldozing free space as I was in hurry to get the boat finished.
2005-08-06 The local sawyer promised to make the strips, but he could not get anyone to plane the convex concave shape. After all I found a "Wizard" who did the job.
2005-08-07 I calculated the consumption of chipboards by sketching the moulds on a peace of paper .
2005-08-07 Measuring the moulds on 18 mms chipboard.
2005-08-07 Listings from the spreadsheet with new coordinates where the baseline is at the edge of a board.
2005-08-08 Cutting the moulds was far too easy after the tough measuring.
2005-09-03 Mould supports are secured with glue and 8 mms bolts. I drilled more than 4 meters of hole for the bolts.
2005-09-16 I didn't pay too much attention on the strongback because in my opinion the moulds must anyway be measured in relation to each other instead of the workshop floor.
2005-09-16 A thread is strained perpendicularly across the horizontal mould supports to mark the centerline. By using supports I beliewe that fixing the moulds in their right position will be easier.
2005-09-16 Somewhat easy to lay the moulds in their positions...
2005-09-16 Looks like a boat.
2005-09-16 Wickström W-1 - source of domestic power. The other one fires - stack of spare parts do not.More...
2005-09-16 This propeller needs some polishing. Epidemic nephropathy is hiding in those dark tiny pieces of bank vole excrement along the floor. More...
2005-09-16 On basis of the serial number this engine was manufactured 1960.
2005-09-23 Notice the old bird house on the wal. It needs some fixing before next spring.
2005-09-23 The moulds are glued and screwed with crossbars to each others. The jig feels quit firm.
2005-09-24 The first season has come to its end and the cleaning job is also done.Go to top